A2K-SBN-1
July 10, 2025
A2K-4WD
July 10, 2025
A2K-FFC Field fit connectors
Field fit connectors allow full customisation of your NMEA 2000 network cabling.
Male and female variants, as well as right angle options for each, provide full flexibility and make it easy to install cable around tight bends, meaning your network can be fully customised. Actisense Field Fit Connectors allow for secure, reliable connections in any NMEA 2000 installation using Lite cable. The glands inside the connectors tighten around the cable as they are screwed together to maintain watertight integrity.
The Field Fit Connectors allow cables to be cut to any length resulting in less excess. Right angled options mean cables can be fitted at any angle to allow ease of installation from the desired entry point. The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.
Stock: available
Ordering Information
To order the Field Fit Connectors, please use the following product codes:
- A2K-FFC-SF – Straight female
- A2K-FFC-SM – Straight male
- A2K-FFC-RF – Right angle female
- A2K-FFC-RM – Right angle male
Tech Specs
STRAIGHT MALE |
|
| Electrical | |
| Rated Current | 4A |
| Rated Voltage | 60VDC |
| Mechanical | |
| Connector Contact | Brass, gold plated |
| Wire Gauge/Size | 22 AWG/0.34mm |
| Contact Resistance | ≤ 5 mΩ |
| Contact Polarisation | Standard M12 -“A”- polarisation |
| Mating Thread | M12 |
| Connector Screw | Stainless Steel |
| Sealing Gland Size | PG9/6-8mm Cable |
| O-Ring Seal | Rubber, black |
| Connector Insert | TPU |
| Connector Body | PA+GF, black |
| Insulation Resistance | ≥ 100 MΩ |
| Weight | 21.1g |
| Approvals and Certifications | |
| Protection | IP67 (in locked condition) |
| Ambient Temperature | -25°C to +90°C |
| NMEA 2000 Approved | |
| RoHS Compliant | |
| IEC 61076-2-101 Compliant | |
RIGHT-ANGLED MALE |
|
| Electrical | |
| Rated Current | 4A |
| Rated Voltage | 60VDC |
| Mechanical | |
| Connector Contact | Brass, gold plated |
| Wire Gauge/Size | 22 AWG/0.34mm |
| Contact Resistance | ≤ 5 mΩ |
| Contact Polarisation | Standard M12 -“A”- polarisation |
| Mating Thread | M12 |
| Connector Screw | Stainless Steel |
| Sealing Gland Size | PG9/6-8mm Cable |
| O-Ring Seal | Rubber, black |
| Connector Insert | TPU |
| Connector Body | PA+GF, black |
| Insulation Resistance | ≥ 100 MΩ |
| Weight | 22.3g |
| Approvals and Certifications | |
| Protection | IP67 (in locked condition) |
| Ambient Temperature | -25°C to +90°C |
| NMEA 2000 Approved | |
| RoHS Compliant | |
| IEC 61076-2-101 Compliant | |
STRAIGHT FEMALE |
|
| Electrical | |
| Rated Current | 4A |
| Rated Voltage | 60VDC |
| Mechanical | |
| Connector Contact | Brass, gold plated |
| Wire Gauge/Size | 22 AWG/0.34mm |
| Contact Resistance | ≤ 5 mΩ |
| Contact Polarisation | Standard M12 -“A”- polarisation |
| Mating Thread | M12 |
| Connector Screw | Stainless Steel |
| Sealing Gland Size | PG9/6-8mm Cable |
| O-Ring Seal | Rubber, black |
| Connector Insert | TPU |
| Connector Body | PA+GF, black |
| Insulation Resistance | ≥ 100 MΩ |
| Weight | 26.5g |
| Approvals and Certifications | |
| Protection | IP67 (in locked condition) |
| Ambient Temperature | -25°C to +90°C |
| NMEA 2000 Approved | |
| RoHS Compliant | |
| IEC 61076-2-101 Compliant | |
RIGHT-ANGLED FEMALE |
|
| Electrical | |
| Rated Current | 4A |
| Rated Voltage | 60VDC |
| Mechanical | |
| Connector Contact | Brass, gold plated |
| Wire Gauge/Size | 22 AWG/0.34mm |
| Contact Resistance | ≤ 5 mΩ |
| Contact Polarisation | Standard M12 -“A”- polarisation |
| Mating Thread | M12 |
| Connector Screw | Stainless Steel |
| Sealing Gland Size | PG9/6-8mm Cable |
| O-Ring Seal | Rubber, black |
| Connector Insert | TPU |
| Connector Body | PA+GF, black |
| Insulation Resistance | ≥ 100 MΩ |
| Weight | 27.8g |
| Approvals and Certifications | |
| Protection | IP67 (in locked condition) |
| Ambient Temperature | -25°C to +90°C |
| NMEA 2000 Approved | |
| RoHS Compliant | |
| IEC 61076-2-101 Compliant | |